2.2.3
Motor and Park Brake Connections
The DX-GB has two motor cables (left and right) that plug directly into the motors.
Programming note:
You can program the DX-GB to swap the motor connections, if
necessary.
2.2.4
DX BUS Connections
The DX-GB communicates with the rest of the DX system through the DX BUS.
The DX BUS also supplies power to every other DX Module.
Warning:
If only one DX BUS connector is used on the DX-GB, a blanking plate
must be fitted to the unused connector. DCL Part/Order Number
GME64909 DX-GB Connector Cover Plate can be used.
GBK64048
: Issue 1 – June 2007
14
