Install Video at
www.DynamicMounting.com/Install
9
9
Note:
We recommend having 1 or 2 people help with this part.
Attaching the Television to the Mount
Figure 12, Hanging TV onto Mount (Top View)
After the above steps are finished you are ready to put the television on the mount.
1.
Adjust the counterbalance to the approximate force to handle the weight of your television. See the Adjusting the Counterbalance
section on page 12 for more details. If in doubt, error to the counterbalance supplying too much force. You can easily adjust force
later.
2.
Figure 12 shows how to slide the TV Hangers and TV onto the Mount.
3.
Slide 1st TV Hanger onto Hook Plate as far as it will go.
4.
Rotate TV Back to align 2nd TV Hanger.
5.
Slide 2nd TV Hanger onto Hook Plate until TV is centered on Hook Plate.
6.
Before positioning the television side to side or pulling the mount down, insert the 2 #10 Screw and Washer through the Hook
Plate and into the TV Hangers, finger-tighten to ensure the TV will not fall off.
7.
Adjust the television so that it is centered on the mount.
8.
Tighten the screws down with a screwdriver.
9.
Put on the 1/4" Nut and Washer and tighten down with 7/16” wrench
10.
Adjust the counterbalance so that the television can be moved around as easily as possible but still be able to stay in the desired
bottom position. See the Adjusting the Counterbalance section on page 12.
