3
Figure 3 Setup for a Soundbar Below the TV
Assembly
1.
The Flush Soundbar/Speaker Bracket has a lot of adjustment to account for most TV-Soundbar combinations; it will take careful
planning to find the best setup for you.
2.
Figure 3 shows how to assemble the Soundbar below the TV, for above the TV, flip the entire assembly over.
3.
Figure 2 shows the range of depth for the bracket, and how to adjust the tilt.
4.
The Depth Support comes attached to the Horizontal Support for the most common TV hole spacing of 400mm. It may have to be
moved for different hole spacing
5.
We recommend assembling the Vertical Supports on the TV Hanger, and putting everything else on the Soundbar on the ground.
6.
Assembly and Adjusting would be much easier with 2 people.
7.
To put the Soundbar on bracket, move the mount to the out position. For manual mounts, turn the counterbalance force up to
account for the extra weight and use the 1/4” X 8” Install Bolt included with the TV mount, to keep the mount from raising.
8.
To be able to lift the TV mount by grabbing the Soundbar. The top of the speaker needs to be butted against the bottom of the TV.
Especially when attaching to a TearDrop Slot.
Rubber Bumpers
The mount comes with adhesive backed rubber bumpers that you can use to put between the TV and Soundbar.
