WLAN PCMCIA Card/USB Adaptor
Quick Set-up Guide
2.1
INSTALLING THE SOFTWARE
1.
Exit from all currently running programs.
2.
Insert the provided manufacturer’s CD into your drive. A menu will launch. If
it fails to load automatically, click
Start
-
Run
and enter
d:\run.exe
(substitute
d: with your CD drive letter) then
OK.
3.
Select
Install Driver and Utility
from the menu.
4.
Then
Next
. Select
One Click Installation
-
OK
. The program will look after the
install automatically.
5.
Click
Finish
to complete installation.
2.2
INSTALLING THE ADAPTOR
After installing the software, insert the WLC030 into the PCMCIA slot or plug the
WLL013 into the USB port of your computer.
Windows 98, 98SE, ME & 2000:
Windows will detect and install the driver automatically.
Windows 98: You need to insert your Windows 98 CD to complete
the driver installation.
Windows 2000: When the
Digital Signature not Found
message appears,
click
Yes.
Windows XP only
1.
Windows will report
Found New Hardware
. Select
Install from a list or specific
location [Advanced] - Next
. Click
Browse
then
My Computer
:
WLC030 PCMCIA card:
Browse to
D:\Utility\Driver\PCMCIA\WinXP
WLL013 USB adaptor:
Browse to
D:\Utility\Driver\USB\WinXP
(Substitute D: with your CD drive letter)
2.
Click
Next
then
Continue Anyway
to proceed.
Windows will start copying drivers. Click
Finish
to complete installation.
All Windows users should now follow the next section to configure the
adaptor properties.