Main Menu Introduction
Main Menu Introduction
Main Menu Introduction
3. Preference Menu
The preference menu is used to set
language and audio configuration.
3.1 OSD Language
OSD Language is used to set menu
language.
3.2 OSD Timeout
OSD timeout is used to set the display time
of the menu.
3.3 OSD Transparency
OSD Transparency is used to adjust the
transparency of the Main Menu.
3.4 Hard Hearing
The hard hearing selection will allow you to
set special subtitles for hearing impaired
users. It is dependant on if the broadcast
operator supports this function.
3.5 Setting
By selecting setting you are able to set
system configurations.
3.6 Upgrade
The Upgrade menu is where users go to
complete software upgrades.
3.7 USB Upgrade
Select USB Upgrade and press the [OK]
button to enter the USB update menu. If a
USB device is inserted the menu will display
like the image to the right.
If you press the [OK] button you can enter
into a folder. Select rom.bin and press the
[ENTER] button to start a USB update
shown in the figure to the right. Once the
USB upgrade is finished the system will
restart automatically.
3.8 AV Setting
The AV setting is used to set video output
configurations including; resolution, output
format etc.
Main Menu Introduction
3.9 Aspect Radio
The aspect ratio setting is used to set the
length width ratio of video.
3.10 Video Resolution
The video resolution setting is used to set
video output resolution and refresh the
frequency.
3.11 HDMI Audio
The HDMI audio setting is used to set
HDMI audio output to either HDMI
Mute/HDMI PCM/HDMI RAW.
8
9
10
11
