1
IMPORTANT - PLEASE READ BEFORE PROCEEDING!
The Dynalco SW-50 speed switches are designed for reliable and rugged operation.
These products have been designed and tested to meet the demands required in many
industrial locations. Performance of this product is directly related to the quality of the
installation and knowledge of the user in operating and maintaining the instrument. To
ensure continued operation to the design specifications, personnel should read this
manual thoroughly before proceeding with installation, operation and maintenance of
this instrument. If this product is used in a manner not specified by Dynalco, the
protection provided by it may be impaired.
Dynalco® is a Barksdale® brand.
WARNING
Failure to follow proper instructions may cause any one of the following
situations to occur: Loss of life; personal injury; property damage; damage to
this instrument; and warranty invalidation.
For clarification of instructions in this manual or assistance with your
application, contact Dynalco as below:
Tech Support:
Or by mail:
Barksdale Inc.
Barksdale® and Dynalco® Products
3211 Fruitland Ave
Los Angeles, CA 90058
Follow all warnings, cautions, and instructions marked on and supplied with the
product.
Use only qualified personnel to install, operate, program and maintain the
product.
Educate your personnel in the proper installation, operation, and maintenance of
the product.
Install equipment as specified in the installation section of this manual. Follow
appropriate local and national codes. Only connect the product to power
sources and end devices specified in this manual.
Any repair is only to be performed by Dynalco using factory documented
components. Tampering or unauthorized substitution of parts and procedures
can affect the performance and cause unsafe operation of your process.
All equipment doors must be closed and protective covers must be in place
unless qualified personnel are performing maintenance.
