3211 Fruitland Ave
Los Angeles, CA 90058
SW-50 SPEED SWITCH
Installation and Calibration Manual
Rev. R3
P/N: 145F-12043
PCO
– 00010383
(c) Copyright 2016, Barksdale, Inc.
All Rights Reserved
Published: FEB 22, 2016
Page 1: ...3211 Fruitland Ave Los Angeles CA 90058 SW 50 SPEED SWITCH Installation and Calibration Manual Rev R3 P N 145F 12043 PCO 00010383 c Copyright 2016 Barksdale Inc All Rights Reserved Published FEB 22 2016 ...
Page 2: ... instructions in this manual or assistance with your application contact Dynalco as below Tech Support Technical dynalco support barksdale com or 1 866 227 8528 Customer Care Sales Dynalco barksdale com or 1 800 835 1060 Or by mail Barksdale Inc Barksdale and Dynalco Products 3211 Fruitland Ave Los Angeles CA 90058 Follow all warnings cautions and instructions marked on and supplied with the produ...
Page 3: ...ibration Connect a signal generator such as the Dynalco F 16 to the SW 50 magnetic pickup input signal input Set the signal generator to a low frequency Slowly increase the frequency Using an ohmmeter across each relay contact in turn determine the frequency at which the relays change state Note overspeed relay will latch if terminal 4 is not grounded Change the setpoints Remove the screws in the ...
Page 4: ...3 Dimensions in Inches Centimeters ...
