8
Plug the PCIII harness in-line of the
stock wiring harness (Fig. G).
i520-411
www.powercommander.com
2008 Triumph Speedmaster - PCIII USB -
4
Fig. G
Fig. H
Fig. J
PCIII connectors
Stock connectors
9
Locate the Throttle Position Sensor on
the left side of the throttle bodies.
10
Using the supplied wire tap crimp
onto the GREEN wire with the
YELLOW stripe.
11
Attach the GREY wire from the PCIII
to wire tap (Fig. H).
To hide this connection you can make
a cut in the stock sheathing further up
the harness and then tap onto the wire
Plug the TPS harness back onto the
throttle bodies if it was unplugged.
12
Attach the PCIII to the rear fender
just rear of the frame crossover. Use
the supplied velcro to secure the unit.
Use the supplied alcohol swab to
clean both surfaces before attaching.
13
Reinstall covers and seat.
TPS
Grey wire from PCIII
Wire tap
