Dynajet Power Commander III Installation Instructions Download Page 1

Page: 1 / 5

i520-411

www.powercommander.com

2008 Triumph Speedmaster - PCIII USB -

2008 Triumph Speedmaster

Installation Instructions

Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com

Parts List

Power Commander

USB Cable

CD-ROM

Installation Guide

Power Adapter

Power Commander Decals

Dynojet Decals

Velcro

Strip

O2 eliminators

Alcohol Swab

You can also download the Power

Commander software and latest maps

from our web site at:

www.powercommander.com

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

Button Adjustment Display

Faceplate Buttons

Expansion Port

USB Port

Summary of Contents for Power Commander III

Page 2: ...t the left side of the bike Go under the frame follow ing the stock wiring harness Fig C Fig A Fig B Fig C i520 411 www powercommander com 2008 Triumph Speedmaster PCIII USB 2 1 Remove the seat 2 Remove the cover to the left side of the airbox intake Fig A Remove cover Remove cover PCIII harness ...

Page 3: ... Attach the ground wire of the PCIII harness to the negative side of the battery Fig D i520 411 www powercommander com 2008 Triumph Speedmaster PCIII USB 3 7 Unplug the 3 pin BLACK connector on the right side of the frame Fig F This connector goes to the throttle bodies Fig E Fig F PCIII ground wire PCIII harness PCIII harness ...

Page 5: ... the O2 sensors up to this location 15 Unplug each of the O2 sensor connec tions 16 Plug the Dynojet O2 eliminators into the wiring harness The O2 sensors will not be connected to anything at this time They can be removed from the exhaust if desired Fig K i520 411 www powercommander com 2008 Triumph Speedmaster PCIII USB 5 Unplug ...