20
7: ENGINE EXERCISER
Introduction
The functions of the exerciser time clock are shown in the diagram below. The time
clock has two slide switches with three positions: The switch in the upper right corner is a
SET SWITCH used to set the present time and day for your locality, run the program,
change an existing exercise cycle or start a new program. The MODE SWITCH located
in the upper left corner can start the generator manually, exercise the generator
automatically, or disable the exerciser function. The push buttons below the clock
display are used to program the exercise day, time and duration. The SKIP BUTTON is
used to ignore an "exercise" day. The RESET BUTTON initializes the time clock
erasing any previous program.
User Manual for the OPT2600 Series
Automatic
Transfer Switch
