Dynaflow MK5 Eco, Manual

Page: 1 / 8

MK5 Eco Panel overview
Introduction
Welcome to the Dynaflow ® MK5 Eco Control Panel. This panel has been designed by Dynaflow
specifically for the Dynaflow Fume Cupboard. The MK5 Panel has been “Product Certified” ISO
Product Certification to compliance to AS/NZS 2243.8 2014. The MK% has been designed to provide
simple “Function” changes and ease of “Plug and Play” accessories to allow for quick upgrade and
replacement options.
Please find and overview of the MK5 Eco Control Panel below.
Panel Layout
The Dynasafe® Control System MK5 Fume cupboard controller has 4 key aspects
represented on the front panel.

A Graphical LCD display which provide the bulk of the user feedback information.

5x press buttons which allow user interaction.

USB port.

Emergency Stop button.
Panel functions
1. Air flow indicator - indicates when air flow within the cupboard and duct work
meets acceptable requirements
2. Display - indicates cupboard status to the operator. Shows time, current mode,
status information and key functions. Refer display breakdown for more information.
3. Emergency Isolator - used to isolate the cupboard from electrical and gas services in
the event of an emergency.
4. Supply Fault - indicates Mains failure, will flash red should Mains supply fail. The
controller is then operating on batteries.
5. Function switch - used by the operator to enter and exit setup and configuration
options.
6. USB Port - This port provides USB connection to external computers. It is primarily
used for test and commissioning of the cupboard. It provides no user data.
7. Light switch - controls the cupboard lighting.
8. Fan switch - used to start and stop the cupboard.
9. Boost switch - if the cupboard is fitted with Syncroflow® then can be used to boost
airflow.
10. Mute Switch - used to mute buzzer during alarm states. Please note that should a
new alarm occur then the mute will be removed from the alarm. Once the alarm has
been corrected then the buzzer will turn off automatically.