7. Install Steering Wheel Batteries
(Note: Batteries not included)
Loosen the screw in the steering
wheel and remove the cover.
.
.
.
Insert 2 x 1.5V size AA AM-3 or LR6
batteries as shown.
Replace the cover and tighten the
screw to secure it in place.
11
Battery Safety Information:
Batteries may leak fluids that can cause chemical burn injury or ruin your product.
To avoid battery leakage:
●
Install batteries correctly, observing the polarity (+,-) signs to avoid leakage.
●
Do not mix old and new batteries.
●
Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (Ni-MH).
●
Remove the batteries from the battery compartment when the unit will not
be used for an extended period of time.
●
Always remove exhausted batteries from the batteries compartment.
●
Do not dispose of batteries in
fire.
●
Do not short circuit the supply terminals.
●
Replace the batteries when the horn sounds distorted.
●
Non-rechargeable batteries are not to be recharged.
●
Use only batteries of the same or equivalent type as recommended.
●
If removable rechargeable batteries are used, they are only to be charged
under adult supervision.
●
Remove rechargeable batteries from the product before charging.
●
Battery chargers used with toys must be examined regularly for damage to
the cord, plug, enclosure and other parts. In the event that such damage is
found, the toy must not be used with the battery charger until the damage
has been repaired.
Unlock
Door
8. Vehicle Window Assembly
. Open the vehicle door. <see figure 1>
Note
：
Vehicle door can be opened by
pushing the locking mechanism as
shown right; please close the door and
push it back to lock the door when riding
for safety consideration.
. Locate the vehicle window over the door.
<see figure 2>
. Insert four 4x12 round head screws and
tighten it securely with a screwdriver.
<see figure 3>
. Repeat above operation for vehicle window
on the other side.
Note: Distinguish the left and right vehicle
door before assembly.
