manualshive.com logo in svg

Dynacraft BALANCE CYCLE, Owner'S Manual

Share
Download
Dynacraft BALANCE CYCLE Owner'S Manual Download Page 5

5

ASSEMBLY INSTRUCTIONS

   

   WARNING 

 

The Balance Cycle is to be assembled by an adult.

 As shipped in the box 

it is partially assembled and contains potentially hazardous sharp edges and 
points on screws and axel rods. The box contains a package of small parts, 
cap nuts and fasteners that pose a swallowing hazard to small children.  
Assemble the Balance Cycle with out your child’s help and keep these  
hazards away from your child until assembly is complete. 

TOOLS NEEDED FOR ASSEMBLY

  Adjustable wrench (not included) or 13 mm, 14 mm and 16 mm wrenches  
(not included).

NOTE:

 The Balance Cycle comes partially assembled, you need to install the 

front fork (together with front wheel), install and adjust the handlebar, install 
the rear wheel, and set the seat height.

FRONT FORK AND HANDLEBAR ASSEMBLY

NOTE:

 The front wheel has been already assembled onto front fork.

STEP 1.

 

Insert the front fork (together with the front wheel) into the frame head 

tube, make sure the slot in the front fork faces the rear of the cycle  
(see Figure 1).

NOTE:

 The Balance Cycle has a steering control mechanism. To make it work, 

be sure to have the fixer (on front fork) well seated into hollow area under the 
plastic washer of the head tube (see figure 2 and 3). 

SLOT

FIXER

FIXER

HOLLOW AREA

FIGURE 1

FIGURE 2

FIGURE 3

Summary of Contents for BALANCE CYCLE














Reviews:

No comments

Brands by name

Popular brands

Load more brands