manualshive.com logo in svg

Dynacraft 12V DUNE BUGGY, Owner'S Manual

The Dynacraft 12V DUNE BUGGY is the ultimate off-road adventure ride for kids. Explore the wilderness with speed and style. Ensure a safe and thrilling experience for your little ones by referring to the comprehensive Owner's Manual. Download it for free from our website and gear up for unforgettable family fun.

Share
Download
background image

13

BATTERY CHARGING

IMPORTANT!

 Before first time use, charge the battery for at least 18 hours. Charge 

the battery for at least 12 hours after each use of the vehicle. Never charge the 
battery longer than 30 hours. Overcharging or undercharging the battery may 
shorten battery life and decrease vehicle running time.

 WARNING:

  The battery can fall out and injure a child if vehicle tips over. 

9. POWER SUPPLY CONNECTION

NOTE:

  The battery is disconnected for shipment to prevent the battery from 

draining.

•  Loosen the two screws on battery cover with Phillips screwdriver. 
•  After opening the battery cover, you will find two connectors at right inside the 

battery compartment.

•  Push the connectors together until you here a “Click”, and insert them back 

carefully.

•  Re-tighten the two screws onto the battery cover.

Summary of Contents for 12V DUNE BUGGY


































Reviews:

No comments

Related manuals for 12V DUNE BUGGY

Brands by name

Popular brands

Load more brands