Dynacord MXE Series, Installation Manual

Page: 7 / 24

MXE DSP Matrix Mix Engine Series Safety | en 7
Bosch Security Systems, LLC Installation manual 2020-08 | V04 | F.01U.352.860
IT security disclaimer
In order to offer maximum compatibility with all networked audio devices and to allow for fast
and easy setup and maintenance, our OMNEO-enabled products:
–
do not verify the authenticity of any Dante or OCA controllers (or any other node) on the
network
This means that these devices do not take any special precautions against malicious or
accidental attacks via their network interfaces. Such attacks happen every day on the public
internet. It is strongly recommended to set up the system in a safe, isolated network, meaning
a network where all hardware components are known and physically owned and none of them
is connected to the public internet.
Voice evacuation systems disclaimer
While capable of being used for announcements, MXE series products have not been certified
as components of voice evacuation systems according to EN54-16. Voice evacuation systems
for life safety applications must not be designed and built using MXE DSP Matrix Mix Engines.
1.3 High frequency interference - FCC/EN55032
IMPORTANT : Do not modify this unit! Changes or modifications not expressly approved by the
manufacturer could void the user’s authority, granted by the FCC, to operate the equipment.
Notice!
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
–
Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV/communications equipment technician.
FCC suppliers Declaration of Conformity
Product(s):
Material Commercial code Material description
F.01U.335.530 MXE5 DSP matrix mix engine 24x24 channels
Compliance statement
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
1.
This device may not cause harmful interference, and