DPA 4410 POWER AMPLIFIER
Features
•
4 x 100 W output capacity
•
off ground potential 100 V outputs (internally configurable to 70 V/50 V or 4 ohms)
•
all outputs are protected against floating (no load) and short-circuit
•
mains supply 115/230 V AC or battery operation 24 V DC
•
mains switch 115/230 V
•
REMOTE CONTROL start with STANDBY indicator (mains and battery operation)
•
service mains switch
•
GROUND-LIFT switch
•
active ventilated through a temperature-controlled DC ventilator
•
electronically balanced inputs
•
routing switch for parallel operation of the amplifier inputs
•
input level control
•
power-on noise suppression
•
3 LED indicators with CLIPPING indicator for metering purposes
•
MONITOR outputs
•
temperature control with PROTECT indicator
•
fault indicators: READY and GROUND FAULT
•
fault message via off potential READY contact
•
TEST switch for pilot tone surveillance and GROUND FAULT reset
•
off ground potential, balanced input transformer are optionally available
•
pilot tone surveillance module and ground fault surveillance module are optionally available
•
19" rack dimensions with 3 HU
OWNER’S MANUAL
17
