Dynacord AM 12, Owner'S Manual, Page: 15 / 28

CABLING
15
CABLING
Loudspeaker cable - Experience has shown that cable with rubber jacket, a diameter of 2.5mm
2
per conductor, and
SPEAKON-type plugs and jacks represent the optimal speaker connection solution. Connect the SPEAKON-type con-
nectors on the rear panel of the AM12 according to the example in the diagram. DYNACORD loudspeaker cables that
have SPEAKON-type connectors as well as any other types of cable are available from your dealer.
LF-cord
For connecting audio signal sources to the AM12, we recommend using cable with balanced XLR-type or stereo pho-
ne plug connectors. Using balanced cable reduces the risk of sound degradation resulting from interference. However,
make sure to mind the pin-assignment as shown below. Original DYNACORD cable from our accessory program will
always comply with this pin-assignment.
XLR MALE
XLR FEMALE
balanced connection of
microphones
unbalanced
external equipment with XLR-
type in/output jacks
balanced
unbalanced
external equipment with XLR-
type in/output jacks
balanced