User’s Manual
9
2.3
Communication Switch Setting
The Camera’s communication switches are specified in the table below.
Communication Switch
SW 1
RS-485 Setting
SW 2
SW 3
SW 4
SW 5
Reserved
SW 6
Reserved
RS-485 is the interface that communicates the Camera and its control device;
for this reason, the RS-485 setup of the Camera and the control device must be
the same. The RS-485 default setting is half-duplex (see the diagram follows).
Please do not change the default setting without qualified specialist or supplier’s
notice.
RS-485 Setting
Half-duplex
Full-duplex
