DYNABRADE
®
DYNABRADE, INC.,
8989 Sheridan Drive
•
Clarence, NY 14031-1490
•
Phone: (716) 631-0100
•
Fax: 716-631-2073
•
International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
Zone Artisanale
•
L-5485 Wormeldange—Haut, Luxembourg
•
Telephone: 352 76 84 94 1
•
Fax: 352 76 84 95 1
© DYNABRADE, INC., 2005
PRINTED IN USA
PD00.46_Rev.1_06/05
Visit Our Web Site:
www.dynabrade.com
Email:
Dynaswivel
®
Swivels 360° at two locations which allows an air
hose to drop straight to the floor, no matter how
the tool is held.
Note:
For proper connection to a 1/4" NPT
thread, a reducing bushing is required.
•
95461:
3/8" NPT.
96260 Motor Tune-Up Kit
•
Includes assorted parts to
help maintain and repair motor.
50066 1/4" Collet Assembly.
Collet Inserts
•
50013
– 1/4"
•
50014
– 3/8"
•
50016
– 6mm
•
50039
– 8mm
•
50065
– 1/8"
Optional Accessories
8.
Apply Loctite #567 PST Pipe Sealant to threads of
94523
Inlet Adapter and install entire muffler assembly onto valve body (torque 23 N•m/200 in. - lbs.).
9.
Replace air fitting. Secure inlet adapter with a wrench before tightening air fitting. Install throttle lever and
01017
Pin.
Tool Assembly Complete. Please allow 30 minutes for adhesives to cure before operating tool.
Important:
Motor should now be tested for proper operation at 90 PSIG. If motor does not operate properly or operates at a higher RPM than marked on the
tool, the tool should be serviced to correct the cause before use. Before operating, place 2-3 drops of Dynabrade Air Lube (P/N
95842
) directly into air inlet
with throttle lever depressed. Operate tool for 30 seconds to determine if tool is operating properly and to allow lubricating oils to properly penetrate motor.
Loctite
®
is a registered trademark of Loctite Corp.
Disassembly/Assembly Instructions - Dynastraight
®
(Continued)
95542 Grease 10 oz.
•
Multi-purpose grease for all types of bearings,
cams, gears.
•
High film strength; excellent resistance to
water, steam, etc.
•
Workable range 0˚ F to 300˚ F.
95541 Push-type Grease Gun
•
One-hand operation.
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
95842:
1pt. (473 ml)
95843:
1gal. (3.8 L)
Dynastraight
®
Arbors
Mount up to 2" wide wheels
13014:
14mm diameter
For Model:
13203
.
13016:
1/2" diameter
For Models:
13201
and
13206
.
13017:
5/8" diameter
For Model:
13202
.
Note:
To mount 1" wide wheels, an
additional spacer is required.
Mount up to 3-1/2" wide
Dynacushion
®
wheels
2-1/8"
5-3/4"
2-3/4"
4-3/4"
Spacers (2)
3" diameter Wheel Flanges (2)
Mount up to 3" wide wheels
13071:
Combo 5/8" or 1" diameter.
For Models:
13200
,
13205
,
13207.
13015:
5/8"-11 threaded.
For Model:
13204
.
