Dynabrade Dynabug 57810, User Manual

Page: 61 / 68

Table 3: show ntp associations Output Fields (continued)
Field Description Field Name
Peer name and status of the peer in the clock selection process:
• space—Discarded because of a high stratum value or failed sanity checks.
• x —Designated "falseticker" by the intersection algorithm.
• . —Culled from the end of the candidate list.
•
–
—Discarded by the clustering algorithm.
•
+
—Included in the final selection set.
• # —Selected for synchronization, but the distance exceeds the maximum.
•
* —Selected for synchronization.
•
o
—Selected for synchronization, but the packets-per-second (pps) signal is in use.
peer-name
Sample Output
show ntp associations
user@host>
show ntp associations
remote refid st t when poll reach delay offset disp
==============================================================================
*wolfe-gw.junipe tick.ucla.edu 2 u 43 64 377 1.86 0.319 0.08
49 Copyright © 2014, Juniper Networks, Inc.
Chapter 5: Monitoring Commands