DYNABRADE
®
DYNABRADE, INC.,
8989 Sheridan Drive
•
Clarence, NY 14031-1490
•
Phone: (716) 631-0100
•
Fax: 716-631-2073
•
International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
Zone Artisanale
•
L-5485 Wormeldange—Haut, Luxembourg
•
Telephone: 352 76 84 94 1
•
Fax: 352 76 84 95 1
© DYNABRADE, INC., 2014
PRINTED IN USA
Precision Tool Post Grinder Contact Wheels
Part No.
Diameter
Width
Face Material
66429
4"
1-1/2"
50 Duro Plain Neoprene
66430
4"
1-1/2"
70 Duro Plain Neoprene
66431
4"
1-1/2"
90 Duro Plain Neoprene
66432
4"
1-1/2"
70 Duro Serrated Neoprene
66433
4"
1-1/2"
90 Duro Serrated Neoprene
Contact Wheel Assembly
Contact Wheel Assembly Parts
(sold separately)
66438 Coolant
Nozzle Assembly
For wet operations
.
66439 Key Mount
66439
Mount
Allows offset tool
installation for “facing”
passes.
Controls
flow and splash
point of coolant.
One cuff (not installed). Mounts directly to machine.
95800 Hose Cuff
1-1/4" x 1-1/4" (32mm x 32mm) Dia.
Has internal thread for
1-1/4" (32mm) dia. hose.
Mounts to machine’s
vacuum scoop.
54205 Exhaust Hose
1-1/4" (32mm) Diameter
By-the-foot (no cuffs); specify up to 50 feet (15 meters).
66417
Contact Wheel Shaft
Contact Wheel
97516
Double Row Contact
Wheel Bearing
97435
Contact Wheel
Retaining Ring
Contact Wheel Change:
1. Turn air control valves to closed position. Disconnect power source from tool.
2. Remove belt from tool.
3. Remove
97112
Set Screw from front housing and remove entire contact wheel assembly.
4. Remove
97435
Retaining Ring.
5. Press
66417
Contact Wheel Shaft from contact wheel and bearing.
6. Press new contact wheel, with bearing installed, onto contact wheel shaft.
7. Line up recess hole in contact wheel shaft with set screw hole in front housing. Replace and tighten set screw with shoulder of contact wheel shaft
pressed firmly against machine face of front housing.
Accessories
96259 Motor Tune-Up Kit:
Includes assorted parts to help
maintain and repair motor.
Visit our Web Site:
www.dynabrade.com
Email: