Dynabrade 53103 Operating And Maintenance Download Page 8

DYNABRADE

®

DYNABRADE, INC.,

8989 Sheridan Drive   

Clarence, NY  14031-1490   

Phone: (716) 631-0100   

Fax: 716-631-2073   

International Fax: 716-631-2524

DYNABRADE EUROPE S.àr.l.,

Zone Artisanale    

L-5485 Wormeldange—Haut, Luxembourg    

Telephone: 352 76 84 94 1   

Fax: 352 76 84 95 1

© DYNABRADE, INC., 2009

PRINTED IN USA

Visit Our Web Site: 

www.dynabrade.com

Email:

[email protected]

Optional Accessories

Dynaswivel

®

Swivels 360° AT TWO PIVOT POINTS allowing the air hose to
drop directly to the floor while providing superb tool handling.

Part No. 94300 

– 1/4" NPT

Bearing Removal Tool

This tool is designed to pass through the I.D. of the bearing
plate and push against the I.D. of the bearing.

Part No. 96213

Part No. 96214

Bearing Press Tool

Use with (#2) arbor press to achieve accurate
press of bearings and motor parts.

Part No. 96240

Part No. 96244

Dynabrade Air Lube

Formulated for pneumatic equipment.

Absorbs up to 10% of its weight in water.

Prevents rust and formation of sludge.

Keeps pneumatic tools operating longer with greater
power and less down time.

Part No. 95842: 

1pt. (473 ml)

Part No. 95843: 

1gal. (3.8 L)

Reference Contact Information

1. American National Standards Institute – ANSI

3. European Committee for Standardization

25 West 43

rd

Street

Rue de Stassart 36

Forth Floor

B - 1050 Brussels, Belgium

New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023

2. Government Printing Office – GPO

Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803

Motor Tune-Up Kit 

Includes assorted parts to help maintain and repair motor.

Part No. 96047

2" Bearing Separator

Used to remove bearings, gears, and other components.

Part No. 96346

Grease

Multi-purpose grease for all types of 
bearings, cams, gears.

High film strength; excellent resistance 
to water, steam, etc.

Workable range 0˚ F to 300˚ F.

Part No. 9554

2

10oz. Grease Tube

Part No. 95541: 

Push-Type Lubricant Gun

One-hand operation.

Find the Most Current Offering of Support Documents and Accessories at www.dynabrade.com

Hex Key

This is used for the removal and installation of
the 

57066

Muffler Body.

Part No. 96034 

– 12 mm  Hex Key

Portable Vacuum Systems

Dynabrade offers a wide assortment of
vacuuming options to choose from. To help
make your selection please request the most
current portable vacuum systems literature
form your local representative or by searching
our web site.

Summary of Contents for 53103









Reviews: