Dynablend DB-850G, Operation Manual

Page: 11 / 32

11
OPERATING INSTRUCTIONS
1. Fill the Glass Pitcher with desired ingredients.
- Blending: Add 2-10 oz. of liquid with your solid ingredients depending on the recipe.
- Grinding grains: Fill the pitcher with ¼ - ½ cup of grains.
2. Place the Motor Base on a stable, level surface.
3. Plug the power cord into an outlet.
NOTE:
Red Dial Light flashes if Dial is at the ‘OFF’ position and solid if at the ‘ON’ position.
4. Place the Glass Pitcher on the Motor Base.
5. Place the Lid on top of the Glass Pitcher.
6. Place the Lid Cap or the Utility Scoop in the opening of the Lid.
7. Turn the Dial to the ‘ON’ position.
NOTE:
The Red Dial Light becomes solid and the Blue Pre-Programmed Button Lights
will start blinking.
8. To activate, press one of the Pre-Programmed Buttons or turn the Variable Speed
Dial clockwise.
9. When you finish blending, turn off the Dynablend
®
by turning the Dial to the ‘OFF’ position.
10. Remove the Glass Pitcher from the Motor Base.
11. Remove the Lid.
12. Pour your blended food into an appropriate serving cup.
13. Unplug the Dynablend
®
and clean the parts and accessories immediately after each use.
NOTE: Tribest
®
Dynablend
®
Horsepower Plus Blender
™
is equipped with a thermo-
protection device. It will automatically shut off if the Motor overheats. Should this happen,
unplug the Dynablend
® and let it cool down for 20 minutes before resuming operation.
Useful Tips For The Best Results
• To achieve the best results when pureeing solid ingredients, place small portions into
the Glass Pitcher one by one instead of blending a large quantity all at once.
• If you are processing solid ingredients like celery, tomato, or apples, cut them into
small pieces (2-3 cm) first.
• When mixing solid ingredients start with a small amount of liquid. Gradually add more
liquid through the opening in the Lid.
• Always place your hand on top of the Lid when you are operating the Dynablend
®
.
• For stirring solid or very thick liquid ingredients we recommend that you use the
blender in pulse mode to prevent the blades from creating an air pocket.
• Overloading the Glass Pitcher with more than 1.5 liters could cause the motor to stall.
Should the motor stall, turn the Dynablend
®
off, unplug from the outlet, and remove a
portion of the mixture before continuing.
• Do NOT place hands or utensils into the Glass Pitcher while the machine is in operation
or when the Dynablend
® is plugged in.