Dyna-Glo KFA135H User'S Manual And Operating Instructions Download Page 12

11

  E.) NOZZLE

  

REMOVE DIRT IN NOZZLE AS NEEDED (SEE PAGE 16).

   

(For KFA50H /80H/135H Models Only)   

 

   -  Remove upper shell (See page 10).

   

-  Remove fan blade (See page 10).

   

-  Remove fuel and air line hoses from nozzle adaptor.

   

-  Remove ignitor wire from spark plug.

   

-  Remove spark plug from nozzle adaptor using medium

   

  phillips screwdriver.

   

-  Turn nozzle adaptor 1/9 turn(40°) to counter clock wise

   

  and pull toward motor to remove. (See Figure 14)

   

-  Place plastic hex-body into vise and lightlry tighten.

   

-  Carefully remove nozzle from nozzle adaptor using 5/8”

   

  socket wrench.

   

-  Blow compressed air through face of nozzle.

   

  (this will remove any dirt in nozzle)

   

-  Reinstall nozzle into nozzle adaptor until nozzle seats.

   

  Tighten 1/3 turn more using 5/8” socket wrench.

   

  (40~45 inch-pounds)

   

-  Reinstall nozzle adaptor to bracket adaptor.

   

-  Reinstall spark plug to nozzle adaptor.

   

-  Attach ignitor wire to spark plug.

   

-  Attach fuel and air line hoses to nozzle adaptor.

   

-  Reinstall fan blade and upper shell.

   

(For KFA220H Model Only)

   

-  Remove upper shell (See page 10).

   

-  Remove fan (See page 10).

   

-  Remove fuel and air line hoses from nozzle adaptor.

   

-  Remove ignitor wire from spark plug.

   

-  Remove spark plug from nozzle adaptor using medium

   

  phillips screwdriver.

   

-  Turn nozzle adaptor 1/8 turn (45°) to counter clock wise

   

  and pull toward motor to remove. (See Figure 15)

   

-  Place plastic hex-body into vise and lightly tighten.

   

-  Carefully remove nozzle from nozzle adaptor using 5/8”

   

  socket wrench.

   

-  Blow compressed air through face of nozzle.

   

  (this will remove any dirt in nozzle)

   

-  Reinstall nozzle into nozzle adaptor until nozzle seats

   

  Tighten 1/3 turn more using 5/8” socket wrench

   

  (40~45 inch-pounds)

   

-  Reinstall nozzle adaptor to burner bracket

   

-  Reinstall spark plug to nozzle adaptor.

   

-  Attach ignitor wire to spark plug.

   

-  Attach fuel and air line hoses to nozzle adaptor.

   

-  Reinstall fan blade and upper shell.

      

 

Figure 14. Nozzle Replacement

Figure 15. Nozzle Replacement

Combustion Chamber

Combustion Chamber

Screw

Screw

Ignitor Wire

Ignitor Wire

Spark Plug

Spark Plug

Nozzle Adaptor

Nozzle Adaptor

Bracket Adaptor

Bracket Burner

Nozzle Adaptor

Nozzle Adaptor

Nozzle Face

Nozzle Face

Nozzle

Nozzle

Fuel Line

Fuel Line

Air Line

Air Line

NEVER LEAVE THE HEATER 

UNATTENDED WHILE BURNING!

Summary of Contents for KFA135H




























Reviews: