24
Dual Fuel Grill
Lighting the Charcoal Grill
OPERATION INSTRUCTIONS FOR CHARCOAL GRILL
LIGHTING INSTRUCTIONS FOR CHARCOAL IGNITION BURNER
NOTE: Refer to pages 19-21 for complete LP tank installation, valve opening
or closing, and leak checking.
Warning: Do not lean over grill when lighting. Read instructions before lighting.
1. Check that the charcoal ignition control knob is
in the OFF position.
2. Open valve at tank fully by turning counter-
clockwise . Always check the tank and
hose connection before lighting.
3. Place charcoal on charcoal tray and lower the
tray directly over burner.
4. Insert a match in the end of the match holder
that is installed on the inside of the cabinet
door and light the match.
5. Immediately place the lit match next to the
charcoal ignition burner on the inside front of
the grill (Fig 1).
6. Turn charcoal ignition knob counter-clockwise to the ON position.
7. Once the burner is lit, allow it to burn for approximately 5-10 minutes then turn ignition knob
clockwise to the OFF position.
NOTE: If ignition does not take place within 5 seconds, immediately turn the ignition control knob
clockwise to the OFF position. Wait 5 minutes and repeat steps 4-7 above.
You can begin cooking when briquettes have a light coating of grey ash (approx. 25-30 minutes).
Adjusting Temperature
This grill has an adjustable charcoal tray. By turning the crank handle, the charcoal tray can be
raised or lowered to desired height. This allows for different heat settings depending on the food
CARBON MONOXIDE HAZARD
Burning charcoal inside can kill you. It gives off carbon monoxide, which has no odor.
NEVER burn charcoal inside homes, garages, vehicles, or tents.
FIG. 1
