Position in Row
Row
Row
Position in Row
4
Figure
Press in
and hold
Print head
Distributed by:
DYMO, Stamford, CT
800-426-7827: www.dymo.com
©2008 Sanford, L.P.
W001835 Rev. 2/09
Adding the Date
Press
1.
.
Select
2.
Date
and press
.
Adding Box and Underline Styles
You can highlight your text by choosing a box or underline style.
Underline
Edged
Square
Train
Pointed
Sweet Hearts
Rounded
Flowers
Crocodile
Press
1.
.
Select
2.
Borders
, and press
.
Select underline or a box style and press
3.
.
Adding International Characters
The label maker supports the extended Latin character set using RACE
technology. Similar to using a mobile phone keypad, when you hold
down a letter key for longer than one second, you will scroll through
variations on that letter. To insert the character, release the key when the
desired character appears.
Adding Symbols (continued)
Press
1.
, select
Symbols
, and press
. The first row of symbols
shown in the table appears in the display.
Use the arrow keys to move to the desired symbol. The left and right
2.
arrows move horizontally along a row of symbols. The up and down
arrow keys scroll vertically through the rows of symbols.
When you locate the symbol, press
3.
to add the symbol to your label.
Previewing Your Label
Press
1.
.
Select
2.
Preview
and press
.
Clearing the Display
Press
♦
to clear all label text and formatting from the display.
Storing Label Text
You can store up to nine specific labels you use frequently.
Press
1.
.
Select a memory location and press
2.
.
Recalling Stored Labels
Press
1.
.
Select a label to recall and press
2.
.
To clear a memory field, first recall a label and then press
.
Adding Symbols
The label maker supports the symbols shown below.
Caring for Your Label Maker
Clean your label maker from time to time to keep it working properly.
Clean the cutter blade each time you replace the label cassette.
!
The cutter blade is extremely sharp. Use caution when cleaning.
Cleaning the Cutter Blade
Dampen a cotton ball with alcohol.
1.
Remove the label cassette.
2.
Place the tip of a ball-point pen or
3.
pencil on the black post as shown in
Figure 4, and press the post down.
While holding down the post, press
4.
and hold the cutter lever to expose
the cutter blade.
Release the post and clean both sides
5.
of the blade with the cotton ball.
Release the cutter lever.
6.
Cleaning the Print Head
Remove the label cassette.
1.
Remove the cleaning tool from inside the label compartment cover.
2.
Gently wipe the padded side of the tool across the print head.
3.
Troubleshooting
Problem/Error Message
Solution
No display
Ensure the label maker is turned on.
•
Replace discharged batteries.
•
Poor Print Quality
Replace batteries or attach power adapter.
•
Ensure label cassette is installed properly.
•
Clean the print head.
•
Replace the label cassette.
•
Poor Cutter Performance
Clean the cutter blade. See
Caring for Your
Label Maker
.
Printing
No action required.
Message disappears when printing is finished.
Too many characters
Exceeded maximum number of
characters in buffer.
Delete some or all of the buffer text.
Battery low
Batteries almost discharged.
Replace batteries or connect AC power adapter.
Tape Jam
Motor is stalled due to label jam.
Remove jammed label; replace label cassette.
•
Clean cutter blade.
•
If you still need assistance, contact DYMO Customer Support at
(203) 588-2500. You can also visit the DYMO Web site at
www.dymo.com
.
This product is CE marked in accordance with the EMC directive and the low voltage directive and is
designed to conform with the following international standards:
US FCC Class B Compatibility
Safety - EN 60950, IEC 950, UL 1950
EMC Compatibility EN 61000 3-2/3; EN 61000 4-2/3/4/5/6/8/11; ENV 50204;
EU Immunity - EN 55024 & addendum A1, A2 Electromagnetic Compatibility (EMC) -
Information Technology equipment, Immunity Characteristics
Emissions – EN 61000-6-3: Electromagnetic Compatibility (EMC) - Part 6: Generic Standards
- Section 3: Emission standard for residential, commercial and light industrial environments.
RoHS 2002/95/EC
