DYMEC
5
Specifications
IEEE Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3af for POE
IEEE 802.3at for POE+
IEEE 802.3bt
Compliant with 60W uPoE standard
Compliant with 95W Power over HDBaseT (PoH)
standard
Network Connector
1xRJ-45 10M/100M/1000MBaseT(X) Data
1xRJ-45 10M/100M/1000MBaseT(X) Data with 90W POE
Output Power
Network Cable
UTP/STP above Cat.5e Cable
EIA/TIA-568 10-ohm (100m)
Protocol
CSMA/CD
LED
PW1 (Green): ON
－
Power is detected
PW2 (Green): ON
－
Power is detected
PoE (Amber): ON – 90W PSE is in active mode.
OFF – PSE is in idle mode.
POE Pin Assignment
Pin 1 (V-), 2 (V-), 3 (V+), 6 (V+)
Pin 4 (V+), 5 (V+), 7 (V-), 8 (V-)
Reverse polarity protection
Present
Overload current protection
Present
Power Supply
Redundant Dual DC 52V-56V Power Input
Power Consumption
1 W@52 VDC Without POE
POE power
Maximum POE power 90watts at 52VDC input
Removable Terminal Block
Provides 4 pin terminal block
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG):12-24/14-22
Stranded wire(AWG): 12-24/14-22
Torque:5lb-In/0.5Nm/0.56Nm
Wire Strip length: 7-8mm
Operating Temperature
-40°C to 75°C
Operating Humidity
5% to 95% (Non-condensing)
Storage Temperature
-40°C to 85°C
MTBF (mean time between failure)
716,686 hrs (Telcordia (Bellcore), GB) at 40°C
Housing
Rugged Aluminum, IP30 Protection
Case Dimension (L X W X D) mm
103.5 x 32 x 81.5 mm (L x W x D)
Installation
DIN Rail Mount or Wall Mount
Certifications
Safety
LVD(EN60950-1)
EMC
CE, FCC, EN 55032/24
