30
USE R GUI DE
|
BL UE WAVE
®
A X -5 5 0
Replace Fuse
To replace the fuse, follow these steps:
1.
Open the Fuse Cover using flat screwdriver. (Figure 49)
2.
Lift the Fuse Holder using the flat screwdriver. (Figure 50)
Figure 49.
Open Fuse Cover
Figure 50.
Lift Fuse Holder
3.
Take out the Fuse Holder. (Figure 51).
Note that the fuse holder is labeled for correct orientation.
4.
Replace the fuses with Littelfuse 312 series 250V 10 amp fast acting fuses and put the fuse holder back into the
power entry module. (Figure 52)
Figure 51.
Remove Fuse Holder
Figure 52.
Replace Fuse
5.
Verify the installation is correct by noting the word “FUSED” in the window of the fuse mount.
Figure 53.
Fuse Mount Window
