Dyegoo GT02, Installation Instruction

Page: 10 / 13

 Google Address Link
Send SMS: GOOGLE to terminal, it will reply the terminal current geography
location link
http://maps.google.com/maps/?f=q&hl=en&&q=31.237395,121.390373333333;S=
0;D=2012-5-23
12:00:00;D=0
Please note: the default time is Greenwich time, actual time needs to add your
time zone number
e.g.: enquiry time is 12:00:00, Chinese time is 20:00:00 (+ 8 hours)
 Engine Control (Optional)
When the vehicle was stolen, the administrator can send Cut-off Engine
command via the live tracking monitoring system, Under the conditions of safe
driving, the command will trigger the relay to cut off power of oil pump to stop the
engine, and it can’t be re-start the engine without restore engine command.
To secure the safety of vehicle, the terminal shall in valid GPS signal status, also
speed under 20km/h or still status to cut off engine.
After the theft alarm dismissed, send restore engine command via live tracking
monitoring system will trigger relay to restore the power of oil pump, the vehicle
will able to start up.
Cut off oil pump power
Send SMS:
DYpassword to terminal, and reply: Config ok
Restore Oil pump power
Send SMS:
TYpassword to terminal, and reply: Config ok
Intial password is 000000
e.g.: DY000000,TY000000
 Alarm Method Settings
Send SMS to set the alarm method:
KC0 : Close all arlms;
KC1 : SMS alarm;
KC2 : Phone call alarm;
KC3 : SMS+Phone call alarm;
 Vibration Alarm
Default Alarm status:
Park still status (ACC): Vibration Alarm On;
Driving Status (ACC): Vibration Alarm Off;
Send SMS:
SF to turn on vibration alarm;
Send SMS: CF to turn off vibration alarm;