11
TM
RAID Mode Setup
Set clear RAID mode:
Change the RAID switch to and hold down the Set button while turning on the power
by pressing the Power button. The Quartz 5 will beep indicating the operation is complete.
Please note that clearing/switching RAID modes will delete all data currently on your
HDDs. Be sure to backup all data before clearing/switching RAID modes.
Set RAID mode:
Configure the RAID switch to your desired RAID mode. Next, hold down the Set button
while turning on the power to the Quartz 5. Upon success, a beep will sound indicating
proper RAID set up, followed by detection of the Quartz 5 by the computer.
RAID Switch
Power Button
Set Button
UP
DOWN
Summary of Contents for Quartz 5
Page 1: ...1 TM ...
Page 2: ......