5
www.dyconnfaucet.com
A. Mount the Push Button through a standard countertop hole. Make sure the
attached rubber gasket is installed between the countertop and the push
granted the hole is 1-1/4” in diameter.
If installation of a hole for the Push Button is required, simply drill a 1-1/4”
diameter hole through the countertop. Proceed to install the push button and
rubber gasket.
B. Screw the plastic nut onto the push button from underneath the sink countertop
to secure the Push Button in place and ensure a watertight seal.
Rubber Gasket
Plastic Nut
Push Button
