7
Customer Service 1-888-707-1880 Dyaco Canada Inc.
Email: [email protected]
SB900 ASSEMBLY INSTRUCTIONS
PRE-ASSEMBLY
1.
Using a razor knife (Box Cutter), cut the outside, bottom, edge of box along the dotted line. Lift Box over the unit and
unpack.
2.
Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are found or parts
are missing, contact your dealer immediately.
3.
Locate the hardware package. Remove the tools first. Remove the hardware for each step as needed to avoid confusion.
The numbers in the instructions that are in parenthesis (
#
) are the item number from the assembly drawing for reference.
1
STABILIZER
TUBES
1. Install the front and rear stabilizers with four Carriage Bolts (
81
), four Curved
Washers (
83
) and four Nuts (
82
). The front and rear stabilizer are different. Be
sure to assemble the stabilizer with the wheels onto the front of the bike.
#82
. 3/8” Nut (4 pcs)
#81
. 3/8” x 3-1/2”
Carriage Bolt (4 pcs)
#83
. 3/8” x 23mm
Curved Washer (4 pcs)
HARDWARE
STEP 1
