background image

- 1 -

INSTALLATION INSTRUCTIONS

SA

VE FOR FUTURE USE

Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017

M965498 Rev. 1.3 (5/17)

Model D35100510

To be used with

D35000510.191 - 1/2

"

 Thermostatic Mixing Valve 

D35000530.191 - 3/4

"

 Thermostatic Mixing Valve

Rem

®

  

1/2

"

 (13 mm) & 3/4

"

 (19 mm) 

 Thermostatic Mixing Valve Trim Kit 

Flat Blade Screwdriver

Phillips Screwdriver

FINISHED WALL

6-5/8"

(168 mm)

8-3/8"

(213 mm)

2" to 3" 

(51 mm to 76 mm)

1-7/8" 

(48 mm)

RECOMMENDED TOOLS AND MATERIALS

Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing 
supply stores. It is essential that the tools and materials be on hand before work is begun.

ROUGHING-IN DIMENSIONS: 

• For reference

100

In the United States:

DXV

One Centennial Avenue 

Piscataway, New Jersey 08855

Attention: Director of Customer Care

For residents of the United States, warranty 

information may also be obtained by calling 

the following toll free number: (800) 227-2734

www.DXV.com

In Canada:

DXV 

5900 Avebury Road  

Mississauga, Ontario  

L5R 3M3 

Canada

Toll Free: 1-800-387-0369

Local: 905-306-1093 

Fax: 1-800-395-1498 

www.DXV.ca

In Mexico:

DXV 

Via Morelos 330 

Col. Santa Clara Coatitla  

Ecatepec, Estado de México 55540

Toll Free: 01-800-8391200

www.DXV.mx

Thank you for selecting DXV. To ensure that your 
installation proceeds smoothly, please read these 
instructions carefully before you begin.

Summary of Contents for Rem D35100510

Page 1: ... plumbing supply stores It is essential that the tools and materials be on hand before work is begun ROUGHING IN DIMENSIONS For reference 1 0 0 In the United States DXV One Centennial Avenue Piscataway New Jersey 08855 Attention Director of Customer Care For residents of the United States warranty information may also be obtained by calling the following toll free number 800 227 2734 www DXV com I...

Page 2: ...r supply on Turn KNOB MOUNT until the spout temperature is 100 F Check that arrow marking A on the KNOB MOUNT still points upward after adjusting the thermostat to 100 F If not pull out the RED LOCKING DEVICE Remove KNOB MOUNT by pulling it towards you while standing directlyin front of the valve Reinstall the KNOB MOUNT so that the arrow marking A points upwards Reinstall RED LOCKING DEVICE KNOB ...

Page 3: ...RE KNOB 2 This will increase the mixed water temperature up to the maximum limit previously selected in step 1 Push TEMPERATURE CONTROL KNOB 1 onto KNOB MOUNT 2 Attach TEMPERATURE CONTROL KNOB 1 to valve with ATTACHMENT SCREW 3 Push HANDLE 4 onto TEMPERATURE CONTROL KNOB 1 Tighten SET SCREW 5 with HEX WRENCH 6 to secure HANDLE 4 6 5 1 0 0 2 1 3 4 1 0 0 1 2 ...

Page 4: ...ropriate finish code POLISHED CHROME 100 BRUSHED NICKEL 144 D35100510 MODEL NUMBER 1 0 0 H960680 XXX THERMO CARTRIDGE COVER H961281 XXX TRIM PLATE A860821 XXX HANDLE ADAPTER A860822 XXX HANDLE A961057 191 SET SCREW H961241 191 TRIM PLATE HOLDER H960892 191 HANDLE EXTENSION KIT A860826 191 ESCUTCHEON SCREWS ...

Reviews: