background image

- 4 -

M965701 Rev. 1.1 (5/17)

Replace the “YYY” with

appropriate finish code

POLISHED CHROME

100

BRUSHED NICKEL

144

MODEL NUMBERS

D3510045C

Rem

®

Wall-Mounted Vessel

Lavatory Faucet Trim

5

• With HANDLE 

(1)

 in OFF position, turn on WATER SUPPLIES and check all connections for leaks.

•  Remove AERATOR 

(2)

. First loosen aerator set screw with HEX WRENCH

 (3)

 supplied. Pull out AERATOR 

(2)

 with 

AERATOR KEY

 (4)

.

• Operate HANDLES 

(1)

 to flush water lines thoroughly.

• Replace AERATOR

 (2)

 and tighten set screw.

TEST INSTALLED FAUCET

OFF

ON

OFF

ON

HEX WRENCH

(Supplied)

3

2

4

1

H960740.191

EXTENSION KIT

H960838.XXX

CONTROL HANDLE

H960854.191

ADAPTER RECEIVER (1.2 GPM)

H960853.191

ADAPTER

H960836.191

EXTENSION

M964513-0070A

SPOUT SET SCREW

A962294.191

AERATOR ASSEMBLY

H960856.XXX

ROSETTE

Summary of Contents for Rem D3510045C

Page 1: ...NG IN DIMENSIONS For reference 2 D 51 mm 1 5 8 41 mm 1 2 13 mm 1 1 2 37 mm 2 3 4 70 mm 8 203 mm 11 279 mm 1 7 8 48 mm 1 2 NPT UNION INLETS 1 5 8 2 1 2 41 to 62 mm FINISHED WALL FINISHED WALL 8 203 mm 4 102 mm 8 1 2 215 mm In the United States DXV One Centennial Avenue Piscataway New Jersey 08855 Attention Director of Customer Care For residents of the United States warranty information may also be...

Page 2: ...eck for leaks Remove PLASTER GUARDS 6 and open both valves and check for leaks Close both valves and turn off water supplies Replace PLASTER GUARDS 6 and finish wall construction Determine where the finished wall location will be This measurement is very important Note The rough in measurement from the finished wall is 1 9 16 40 mm minimum and 2 7 16 62 mm maximum This is a 7 8 22 mm tolerance See...

Page 3: ...ount WALL ESCUTCHEON 9 Thread ADAPTERS 10 onto VALVE 11 until WALL ESCUTCHEON 9 is flush against finished wall Inspect that ADAPTER O RINGS 3 4 are seated in the grooves of ADAPTER 5 See View A Install ADAPTER 5 into spout outlet and tighten with wrench Thread SPOUT ADAPTER 7 onto ADAPTER 5 so that the groove extends 9 16 beyond face of ESCUTCHEON See View B Push SPOUT 12 onto SPOUT ADAPTER 7 unti...

Page 4: ...ve AERATOR 2 First loosen aerator set screw with HEX WRENCH 3 supplied Pull out AERATOR 2 with AERATOR KEY 4 Operate HANDLES 1 to flush water lines thoroughly Replace AERATOR 2 and tighten set screw TEST INSTALLED FAUCET OFF ON OFF ON HEX WRENCH Supplied 3 2 4 1 H960740 191 EXTENSION KIT H960838 XXX CONTROL HANDLE H960854 191 ADAPTER RECEIVER 1 2 GPM H960853 191 ADAPTER H960836 191 EXTENSION M9645...

Reviews: