- 3 -
M965523 Rev. 1.5 (4/17)
3
INSTALL FAUCET
4
5
CONNECT HOSE AND SPRAY
TEST INSTALLED FAUCET
• Install SEAL WASHERS
(1)
into COUPLING NUTS
(2)
.
• Thread COUPLING NUTS
(2)
onto ECCENTRICS
(3)
and tighten.
• Install SEAL WASHER
(1)
and connect smaller end of
HOSE
(2)
to Outlet Nipple on side of BRACKET
(3)
.
• Install SEAL WASHER
(4)
to conical end of HOSE
(5)
and attach HAND SPRAY
(6)
.
• Fully tighten both connections.
• Turn VALVES to “off” position.
• With handles in “off” position, turn on water supplies
and check all connections for leaks.
• Remove HAND SHOWER
(7)
and operate both
handles to flush lines.
• Lift HAND SHOWER
(7)
from BRACKET
(8)
and direct spray
into tub. Remove HAND SHOWER
(7)
from HOSE
(5).
Turn DIVERTER LEVER
(9)
to SHOWER and check
all connections for leaks. Replace HAND SHOWER
(7)
onto HOSE
(5)
.
1
2
3
1
7
8
3
2
4
6
5
9
BATH
HAND
SHOWER
CAUTION
The flow rate of this Tub Filler exceeds 20 gallons/minute
at higher water pressure. Do not fill bathtub unattended.
