background image

- 1 -

INSTALLATION INSTRUCTIONS

SA

VE FOR FUTURE USE

Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2020

7302408-100 (2/2020)

RECOMMENDED TOOLS AND MATERIALS

Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing 
supply stores. It is tessential that the tools and materials be on hand before work is begun.

 

Thank you for selecting DXV. To ensure this product is installed properly, please read these instructions carefully before you begin. 
(Certain installations may require professional help.) Also be sure your installation conforms to local codes.

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

NOTE: Pictures may not exactly define contour of china and components.

!

DXV Belshire

 

1-Piece Toilet, Concealed Trapway
Right Height

®

, Elongated, HET 

Model:   D22025A101

Gasket

Wax Ring

Regular Screwdriver

10'

Level

Flexible Supply Tube

Closet Bolts

Putty Knife

Tape Measure

Hacksaw

Sealant

Adjustable Wrench

a.

 Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.

b.

 Disconnect and remove supply line. 

NOTE:

 

If replacing valve, first shut off main water supply!

c. 

Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.

d. 

Remove closet bolts from flange and clean away old wax, putty, etc. from base area.

   

NOTE: 

Mounting surface must be clean and level 

before

 new toilet is installed!

IMPORTANT:

  Water supply on the wall is required at 2-1/4" or 8" from centerline of the toilet. First suggested position is 

hidden behind the toilet. The geometry of the toilet gives space for this installation. The second suggested 
position is next to the toilet. Between these two positions, the space for the supply between wall and toilet  
is limited to 4-1/2". In this case, check your supply and hose dimensions.

1

2

REMOVE OLD TOILET

ALL INSTALLATION PROCEDURES MUST COMPLY IN STRICT ACCORDANCE WITH APPLICABLE LOCAL 

PLUMBING AND BUILDING CODES

In the United States:

DXV
One Centennial Avenue 
Piscataway, New Jersey 08855
Attention: Director of Customer Care

For residents of the United States, warranty 
information may also be obtained by calling 
the following toll free number: (800) 227-2734
www.DXV.com

In Canada:

DXV 
5900 Avebury Road  
Mississauga, Ontario 
L5R 3M3
Canada

Toll Free: 1-800-387-0369
Local: 905-306-1093

Fax: 1

-800-395-1498

www.DXV.ca

In Mexico:

DXV 
Via Morelos 330
Col. Santa Clara Coatitla 
Ecatepec, Estado de México 55540

Toll Free: 01-800-8391200
www.DXV.mx

For rough-in dimensions, see spec page or web site

Summary of Contents for Belshire D22025A101

Page 1: ... off main water supply c Remove old mounting hardware remove toilet and plug floor waste opening to prevent escaping sewer gases d Remove closet bolts from flange and clean away old wax putty etc from base area NOTE Mounting surface must be clean and level before new toilet is installed IMPORTANT Water supply on the wall is required at 2 1 4 or 8 from centerline of the toilet First suggested posit...

Page 2: ...E BODY ADJUSTABLE HEIGHT WATER LEVEL ADJUSTMENT ROD TANK LEVER FLUSH VALVE TOP ARM NIPPLE Diagram 1 PARTS FOR WATER CONNECTION SEE STEP 9 CONE WASHER FLAPPER THREADED SHANK SHANK WASHER COUPLING NUT HAND TIGHT ONLY FILL VALVE FLOAT CUP CRITICAL LEVEL MARK C L MUST BE 1 ABOVE OVERFLOW PIPE REFILL TUBE LOCK NUT CLOSET BOLT WASHER NUT Press firmly WAX RING 7 ADJUSTMENTS Adjust water level Water level...

Page 3: ...r IF FILL VALVE WON T TURN ON OR SHUT OFF or REFILL OF TANK WATER IS SLOW after valve has been in use for some time Fluidmaster Model 242 Replacement Seal may be needed Go to our website at www fluidmaster com for more solutions to toilet problems 9 LIFT ARM FIRST LIFT ARM FIRST LIFT ARM FIRST IMPORTANT Always clear sand and rust from system Make sure water supply is off Remove valve TOP by liftin...

Page 4: ...Be sure that proper supply tube size is used c Remove obstruction Consult a plumber if necessary d Normal supply pressure must be at least 20 psi Toilet leaks a Poor supply line connection b Poor bowl to tank floor connection a Review Step 6 b Review Step 1 5 Toilet does not shut off a Flush valve chain too tight holding flush valve open b Flush valve seat and or flapper worn or deformed c Sand or...

Reviews: