manualshive.com logo in svg

DX DXE-RXSHARE, Instructions Manual

Share
Download
DX DXE-RXSHARE Instructions Manual Download Page 4

- 4 - 

Additional Parts Required, Not Supplied with the DXE-RXSHARE 
 

 

 

Stereo capable headphones 

 

1/4 inch (6.35 mm) or 1/8 inch (3.5 mm) stereo audio jumper cables to connect the RX 
SHARE to the radio stereo headphone jack. 

 

Station ground connection cable 

 

 
Manual Updates 

 
Every effort is made to supply the latest manual revision with each product. Occasionally a manual 
will be updated between the time your DX Engineering product is shipped and when you receive it. 
Please check the DX Engineering web site (www.dxengineering.com) for the latest revision manual.

 

 
 

Installation 

 
Installation is straight forward. The rear panel on the RX Share is shown below with an example 
showing connection from the RX SHARE to the headphone jacks on two Icom-7610 radios and 
connection to two Heil headsets. Additionally, there is a connection for the station ground to help 
avoid any ground loops in the audio lines.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

Summary of Contents for DXE-RXSHARE









Reviews:

No comments

Brands by name

Popular brands

Load more brands