- 26 -
Mating the Vertical Element to the Pivot Base Assembly
1. To lower the antenna, ensure the winch hook is in the Antenna Hook Mount. Remove the four
bolts and hardware that hold the Pivot Lock Plate to the Pivot Base Winch Mount Plate. You
can now use the winch to pivot the antenna downward.
Four Bolts to be removed to allow for pivoting
2. Locate the 3-1/4" long 1/4"
bolts, four stainless steel flat
washers and two 1/4"
stainless steel Nyloc nuts.
Align the 3" OD base section
element with the assembled
vertical elements. Slide the
2.75" element section into the
3" OD base element section
aligning the 4 holes.
