- 5 -
C. Rotate the tool around the cable until the cutting action is
complete. You will feel the stripper cutting the jacket and center
insulation. When the cutting is complete, the tool will spin a bit
free.
D. Squeeze the tool to remove the coaxial cable. There will be 2 cuts made giving you two 1/4”
cuts as shown below. Pull the cut parts off of the coaxial cable.
E. Fold the shield back onto the outer jacket.
F. Insert the prepared Coaxial Cable fully into the
Snap-N-Seal
®
F Connector as shown.
Ensure
the center conductor is slightly sticking out the end is as shown.
