- 1 -
Compression Tool for
Snap-N-Seal
®
75 Ω Coax Connectors
DXE- SNS-CT1
DXE-SNS-CT1-INS Rev 4a
1. Place the coaxial cable end into the
DXE-CPT-659
Cable Striper and rotate the tool around the cable until the
cutting action is complete as shown.
Fold the braided shield back onto the outer jacket.
2. Insert the prepared
DXE-F6 - 75Ω F-6 Style Direct Bury Coaxial Cable
fully into the
Snap-N-Seal
®
F-
Connector as shown. Ensure the center conductor is slightly sticking out the end is as shown.
3. Place the
Snap-N-Seal
®
connector with coaxial cable into the
DXE-SNS-CTI
Compression tool as shown.
4. Fully squeeze the
DXE-SNS-CTI
Compression Tool handles together to completely compress the
Snap-N-
Seal
®
connector as shown.
5. Remove completed coaxial cable assembly from
DXE-SNS-CTI
Compression Tool.