DX Engineering DXE-SNS-CT1 Manual Download

Page: 1 / 2

- 1 -

Compression Tool for

Snap-N-Seal

75 Ω Coax Connectors

DXE- SNS-CT1

DXE-SNS-CT1-INS Rev 4a

1. Place the coaxial cable end into the

DXE-CPT-659

Cable Striper and rotate the tool around the cable until the

cutting action is complete as shown.

Fold the braided shield back onto the outer jacket.

2. Insert the prepared

DXE-F6 - 75Ω F-6 Style Direct Bury Coaxial Cable

fully into the

Snap-N-Seal

F-

Connector as shown. Ensure the center conductor is slightly sticking out the end is as shown.

3. Place the

Snap-N-Seal

connector with coaxial cable into the

DXE-SNS-CTI

Compression tool as shown.

4. Fully squeeze the

DXE-SNS-CTI

Compression Tool handles together to completely compress the

Snap-N-

Seal

connector as shown.

5. Remove completed coaxial cable assembly from

DXE-SNS-CTI

Compression Tool.

Summary of Contents for DXE-SNS-CT1

Page 1: ...2 Insert the prepared DXE F6 75 F 6 Style Direct Bury Coaxial Cable fully into the Snap N Seal F Connector as shown Ensure the center conductor is slightly sticking out the end is as shown 3 Place the...

Page 2: ...25 pieces Snap N Seal is an environmentally sealed CATV F coax connector system for harsh environments The connectors have a unique 360 degree radial compression system that offers the signal leakage...