34
RTR-2 Specifications
Frequency Range
1.8 MHz to 54 MHz
Insertion Loss
Less than 0.1 dB RADIO to
MAIN ANT. Less than 0.5 dB
RADIO to RX ANT (no options)
Maximum RF Power 200 Watts CW/SSB
Power Input
+13.8 Vdc 1A nominal.
A13.8 to +21 Vdc for
operation of an active receive
antenna with internal Bias Tee
enabled.
Optional Plug-in Module Descriptions and Specifications
75 to 50 ohm Impedance Transformer
Plug-in Module
(
DXE-IT-PM
)
A perfect match for changing the line impedance between 50 and 75 ohm systems
Frequency Range
500 kHz through 30 MHz
Insertion Loss
<0.1 dB at 15 MHz, <0.2 dB at 30 MHz
Power Handling
over 30 dBm
Impedance
input = 75 ohm unbalanced
output = 50 ohms unbalanced
Receiver Guard Plug-In Module
(
DXE-RG5000HD-PM
)
These highly effective and inexpensive receive RF limiters prevent front-end damage due to high
RF levels that can result in costly radio repairs.
Frequency Range:
0.5 through 150 MHz
Insertion Loss:
< 0.15 dB at 50 MHz, < 0.3 dB 50 MHz up to 150 MHz
VSWR:
< 1.2:1
Max Output Level: +14 dBm at 10 W input.
Maximum Power Handling: 10 W CCS (Continuous Commercial Service)
System Impedance: 50 ohms, unbalanced
Receive Preamplifier Plug-In Module
(
DXE-RPA-2-PM
)
Optimized for 0.3-35 MHz operating range. The push-pull amplifier design and
robust components enable it to withstand high signal levels and operate when
you need it most. The dynamic range is better than most receivers.
Output TOI (Third Order Intercept): +43 dBm @ 13 Vdc
Noise figure:
3.5 dB
One dB Compression:
+26 dBm (~ .4 watts output)
Gain:
16 dB from 300 kHz - 35 MHz (+1.5 to −1.5 dB over this range)
500 Hz BW IM3 Dynamic range:
110 dB or greater
