Page 6
Figure 2 - Basic Receive Antenna Installation
The DX Engineering Receiver Guard is installed between
the receive antenna (in this example, the
DXE-BFS-1
Beverage Antenna) and the transceiver’s RX ANT IN
connection (receive antenna input). On the ICOM IC-7600,
press and hold the ANT selector until 1/R is displayed on the
screen as the selected antenna. This will connect the
transceiver’s receive input to the Receiver Guard and the
Beverage antenna. Consult your transceiver manual
regarding the use of RX OUT and RX IN connections.
--------------------------------------------------------------------------------------------------------
Figure 3 - Basic Receive Antenna
Installation with optional DXE-RPA
Preamplifier
Figure 3
is the same set up as
Figure
2
with the popular addition of the
optional
DXE-RPA
Preamplifier.
Consult your transceiver manual
regarding the use of RX OUT and RX
IN connections.
--------------------------------------------------------------------------------------------------------
Figure 4 - Typical Beverage Receive
Installation with
optional Preamplifier and Lightning
Protection
Figure 4
expands the options shown in
Figure 3
by including the optional
DXE-RLP-75FF
Lightning Protector installed. Consult your
transceiver manual regarding the use of RX OUT
and RX IN connections.
