35
DXE-F6-1000 - 75 Ω F-6 Style Direct Bury Coax,
1000 ft. Spool Hi Quality, 75 Ω F6 type "Flooded" Coax
Sold by the spool, or as Custom Cable Assemblies
Center Conductor:
18 AWG Copper-Clad Steel , Nominal Diameter: 0.040 in.
Dielectric:
Gas Expanded Polyethylene, Nominal Diameter Over Dielectric: 0.180 in.
Shield:
1st Shield: Aluminum-Polypropylene-Aluminum, Laminated Tape with overlap Bonded to the Dielectric,
Nominal Diameter Over Tape: 0.187 in.
2nd Shield: 34 AWG Aluminum Braid Wire, 60% Coverage
Jacket:
PE (Flooded for Underground), Nominal Diameter Over Jacket: 0.272 in. , Nominal Jacket Thickness: 0.030 in.
Electrical Properties:
Impedance: 75.0 +/- 3.0 Ωs, Velocity of Propagation: 85.0% Nominal
We recommend the use of Snap-N-Seal connectors to ensure a high quality and weather resistant feedline connection.
The proper tool must be used to install these connectors.
Cable, 4 Conductor, Sold per Foot - COM-CW4
A high quality, PVC jacketed 4-wire control cable, COM-CW4 consists of 4 #20 AWG conductors. It may be
used in a multitude of control cable applications, such as remote switching and antenna rotators.
Sold by the foot - order the length you need.
SUM-900031 - Automatic Wire Stripper/Crimper/Cutter, 24-10 Ga.
Our wire stripper uses a spring-loaded design to make quick work of wires ranging from 24 to 10 gauge. Just insert
the wire, squeeze the handle, and listen for the click. That’s the sound of another perfect wire stripping job
performed in about 2 seconds- a fraction of the time it takes your pocket knife to do the same job. An adjustable
wire length guide helps you make uniform strips, and a built-in wire cutter and crimper helps you complete your
wiring job.
Spring-loaded design
Strips wires ranging from 24 to 10 gauge
built-in wire cutter and crimper
KLE-11055 - Klein-Kurve Wire Stripper / Cutter 11055, 18-22 AWG
Klein Tools Klein-Kurve wire strippers are ideal for stripping solid (10-18 AWG) and stranded (12-20 AWG) wire
cleanly and easily. The 7 1/8 in. strippers also have precise shear-type blades to cut copper wire nicely, easy-to-
read markings on both sides, and extra-soft grips and curved handles for comfort.
DXE-CIT-1 - F Connector Tightening Tool
The CIT-1 installs and removes F connectors in high density and hard to reach locations, and is the only tool that
works with bent coaxial cable. Only finger force is required. Provides enough leverage to achieve a 30 in/lb
tightening force by hand. Helps insure proper connections thereby reducing the potential of loose connector related
service calls.
DXE-PSW-12D1A - AC Adapter 12 Vdc/1000 mA
The DXE-PSW-12D1A is an AC Wall Transformer Adapter to furnish 12 Volts DC at 1000 mA from 120 Vac 60
Hz input, fused output. It features a standard 2.1 mm plug connection for 12 Vdc. Outer connection is GROUND
Center Pin is input for +12 VDC. Ideal separate power source for DX Engineering EC-4 BCD Switch
