21
Optional Items
DXE-WP-102 - 102 inch Stainless Steel Whip
This 102'' whip antenna is made from the finest 17-7 ph tapered stainless steel which resists bending and kinking. This material is so
tough it can be bent 180 degrees and will spring back to its original shape. Dissipation tip to reduce unwanted static buildup. Fits all
3/8 x 24 threaded mounts.
Can be bent 180 degrees and will spring back to its original shape
Resist bending and kinking
Excellent for all off-road terrain
DXE-CAVS-1P - V-Bolt Saddle Clamp, 1/2 in. to 1-3/4 in. OD Applications
This V-Clamp is made in one size that fits tubing from 1/2 to 1-3/4'' OD as used in antenna construction. The supplied V-bolt is long
enough to attach tubing to thick plates and is made with anti-corrosive properties. The cast rippled surface of the saddle will clamp
the tubing securely to a flat surface; however, for high-torque applications please use our standard U-Bolt Saddle Clamps.
Used to clamp 1/2 to 1-3/4'' (OD) tubing
Designed for attachments that don't require resistance to torque
V-bolt made from high-strength 18-8* stainless steel
V-saddle cast from 535 aluminum with rippled surface
The use of an Anti-Seize compound is HIGHLY recommended to achieve proper torque and prevent galling.
JTL-12555 Jet-Lube
™
SS-30 Pure Copper Anti-Seize
Jet-Lube
™
SS-30 Pure Copper Anti-Seize is the top choice of engineers and technicians in government, industry and leading Amateur
Radio contest stations, for protecting mechanical assemblies of aluminum tubing, general hardware and copper grounding
systems. On bonded metal surfaces Jet-Lube
™
SS-30 assures electrical and RF conductivity while preventing oxidation
and corrosion. Surpassing the capabilities of other aluminum anti-oxidants, the wide temperature range of Jet-Lube
™
SS-
30 prevents long-term drying and caking, and allows easy disassembly and effortless cleaning of parts. An
environmentally preferred thread lubricant and conductive termination compound, Jet-Lube
™
SS-30 helps keep your
equipment in serviceable condition. It contains a high concentration of copper flakes, a requirement for heavy loads or
compression; controlled frictional characteristics allow the surfaces of nuts and bolts to be tightened to their design torque
specifications. This anti-seize product assures full hydraulic efficiency by allowing the metal surfaces to slide over each
other without damaging metal-to-metal contact. Jet-Lube
™
SS-30 is also designed to work as a similar and dissimilar
component between two metal surfaces to prevent seizing and galvanic action. The SS-30 compound formula improves
conductivity and ground continuity - and will not melt in high temperatures.
Jet-Lube
™
SS-30 Pure Copper Anti-Seize Features include:
* Meets MIL-PRF-907E spec
* K-factor: 0.13
* Service rating: -65 degrees F (-54 degrees C) to 1800 degrees F (820 degrees C)
* SS-30 Resistivity (ohm-CM x 108) 5
DXE-F6-1000 - 75 Ω F-6 Style Direct Bury Coax, 1000 ft. Spool Hi Quality "Flooded" Coax
Sold by the spool, or as Custom Cable Assemblies
Center Conductor:
18 AWG Copper-Clad Steel , Nominal Diameter: 0.040 in.
Dielectric:
Gas Expanded Polyethylene, Nominal Diameter Over Dielectric: 0.180 in.
Shield:
1st Shield: Aluminum-Polypropylene-Aluminum, Laminated Tape with overlap Bonded to the Dielectric,
Nominal Diameter Over Tape: 0.187 in.
2nd Shield: 34 AWG Aluminum Braid Wire, 60% Coverage
Jacket:
PE (Flooded for Underground), Nominal Diameter Over Jacket: 0.272 in. , Nominal Jacket Thickness: 0.030 in.
Electrical Properties:
Impedance: 75.0 +/- 3.0 Ωs, Velocity of Propagation: 85.0% Nominal
We recommend the use of Snap-N-Seal connectors to ensure a high quality and weather resistant feedline connection. The proper
tool must be used to install these connectors.
