- 2 -
Introduction
The
DXE-EC-8
is a flexible 8 position controller used to control the DX Engineering
RR8A
series antenna
switches or any other product that uses a 12 to 24 Vdc 1-of-8 control format.
The
DXE-EC-8
offers the following features:
•
Stainless Steel Housing
•
Non-Skid feet
•
On-Off toggle switch
•
Green LED indicates power is applied
•
Filter capacitors on each line
•
Internal automatic resettable fuse
•
Includes a 2.1 mm power plug for DC power connection
Front and Rear Panels
On/Off toggle switch Control Wire Feed Through
Green LED Power Connection
8 Position Rotary Switch
The
DC
Input used in most applications will be +12 Vdc. You can input up to 24 Vdc if your
application requires 24 Vdc switching. A 2.1 mm power cord is supplied with unit. The wire with
the white stripes is the +12 Vdc.
Outer Connection is GROUND, Center Pin is +12 VDC.
If station power is used, it must be +12 Vdc at 1 amp (fused) minimum. An optional
DXE-PSW-12D1A
120 Vac 60 Hz to 12 Vdc 1 Amp, fused wall transformer supply is
available.
Tools Required
Phillips Head Screwdriver
Wire Stripper
Small Flat Blade Screwdriver
Overall Size
Interior Connections
1. Open the unit by removing the four (two per side) Phillips head screws to remove the cover.
