- 2 -
Introduction
The
DXE-EC-DVA
is the 3 position controller used to control the DX Engineering Dual Vertical Array
systems (
DXE-DVA
series).
The
DXE-EC-DVA
offers the following features:
Stainless Steel Housing
Non-Skid feet
On-Off toggle switch
Three green LEDs indicate position chosen
White blocks to mark your chosen directions
Internal automatic resettable fuse
Includes a 2.1 mm power plug for +12 Vdc power connection
Front and Rear Panels
On/Off toggle switch Control Wire Feed Through
Three Green LEDs Power Connection
3 Position Rotary Switch
The
DC
Input used is +12 Vdc. A 2.1 mm power cord is supplied with unit. The wire with the white
stripes is the +12 Vdc.
Outer Connection is GROUND, Center Pin is +12 VDC.
If station power is used, it must be +12 Vdc at 1 amp (fused) minimum. An optional
DXE-PSW-12D1A
120 Vac 60 Hz to 12 Vdc 1 Amp, fused wall transformer supply is
available.
Tools Required
Phillips Head Screwdriver
Wire Stripper
Small Flat Blade Screwdriver
Overall Size
