- 12 -
Element Clamps
Our Element Clamps are a marine grade clamp.
High nickel alloy stainless steel meets the demands
of severe corrosive environment.
- Band and Housing: 9/16" wide grade 300 stainless steel.
- Screw: 5/16" hex-head grade 300 stainless steel
Ideal
Tube Size(s)*(inches)
Size Range*
(inches)
DX Engineering
Part Number
Description
3/8
0.375
0.32 to 0.58
DXE-ECL-020
Element Clamp with Straight Slot or 1/4” Drive Nut
1/2
0.500
5/8
0.625
0.42 to 0.68
DXE-ECL-040
Element Clamp with Straight Slot or 1/4” Drive Nut
3/4
0.750
0.64 to 0.87
DXE-ECL-060
Element Clamp with Straight Slot or 5/16” Drive Nut
7/8
0.875
1
1.000
0.70 to 1.00
DXE-ECL-10SS
Element Clamp with Straight Slot or 5/16” Drive Nut
1-1/8
1.125
0.83 to 1.25
DXE-ECL-12SS
Element Clamp with Straight Slot or 5/16” Drive Nut
1-1/4
1.250
1-3/8
1.375
1.01 to 1.50
Element Clamp with Straight Slot or 5/16” Drive Nut
1-1/2
1.500
1-5/8
1.625
1.15 to 1.75
DXE-ECL-20SS
Element Clamp with Straight Slot or 5/16” Drive Nut
(Also used as a Hustler BTV Replacement Part)
1-3/4
1.750
1-7/8
1.875
1.31 to 2.00
DXE-ECL-24SS
Element Clamp with Straight Slot or 5/16” Drive Nut
2
2.000
2-1/8
2.125
1.31 to 2.25
DXE-ECL-28SS
Element Clamp with Straight Slot or 5/16” Drive Nut
2-1/4
2.250
2-3/8
2.375
1.56 to 2.50
DXE-ECL-32SS
Element Clamp with Straight Slot or 5/16” Drive Nut
2-1/2
2.500
2-5/8
2.625
1.81 to 2.75
DXE-ECL-36SS
Element Clamp with Straight Slot or 5/16” Drive Nut
2-3/4
2.750
2-7/8
2.875
2.06 to 3.00
DXE-ECL-40SS
Element Clamp with Straight Slot or 5/16” Drive Nut
3
3.000
3-1/4
3.250
2.31 to 3.25
DXE-ECL-44SS
Element Clamp with Straight Slot or 5/16” Drive Nut
Technical Support
If you have questions about this product, or if you experience difficulties during the installation,
contact DX Engineering at (330) 572-3200. You can also e-mail us at:
For best service, please take a few minutes to review this manual before you call.
Warranty
All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from
date of shipment. DX Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item or part thereof which is
proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or
any other work, unless such charges are authorized in advance by DX Engineering. If DX Engineering’s products are claimed to be defective in
material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-
charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing. The above
warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered
defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged
exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts
thereof furnished by Buyer or acquired from others at Buyer’s specifications. In addition, DX Engineering’s warranties do not extend to other
equipment and parts manufactured by others except to the extent of the original manufacturer’s warranty to DX Engineering. The obligations under
the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies
including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY
WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY
IN ACCORDANCE WITH THE FOREGOING.
©DX Engineering 2013
DX Engineering®, DXE®, Hot Rodz
®
, Maxi-Core
®
, THUNDERBOLT
®
, Antenna Designer
®
, Yagi Mechanical
®
, and Gorilla Grip
®
Stainless
Steel Boom Clamps, are trademarks of PDS Electronics, Inc. No license to use or reproduce any of these trademarks or other trademarks is given or
implied. All other brands and product names are the trademarks of their respective owners.
Specifications subject to change without notice.
