- 4 -
Optional Items
60M Add-On Kit for the Hustler® BTV Series Verticals - DXE-AOK-60M
The DX Engineering
DXE-AOK-60M
kit adds 60 meter coverage to the Hustler® BTV series of vertical antennas
without giving up any existing band coverage. This kit will operate across the entire 60m band with an SWR of 1.5:1 or
less. Kit includes the 60 meter resonator and new capacitive compensator. No disassembly of the existing antenna is
required, simply add this kit, make some minimal tuning adjustments and you're on the air with an additional band. The
BTV will retain full performance on all bands.
Direct Coax Feed for Hustler BTV Verticals - DXE-AOK-DCF
The
DXE-AOK-DCF
Direct Coax Feed assembly by DX Engineering for the Hustler® BTV series antennas allows direct
connection from a coaxial cable with a PL-259 connector. Manufactured from heavy duty stainless steel, this add-on kit
allows convenient connection from your coaxial cable feedline directly to the base of the Hustler® BTV-series vertical
antennas. It may be positioned in any one of three different directions to allow straight-in connection from your feedline.
Also order
DXE-8XDU002
(low power) or
DXE-8UDU002
(high power, low loss) coaxial jumper cable for connection
to your
DXE-RADP-3
Radial Plate with
DXE-363-SST
Bulkhead Connector for a professional, reliable installation.
New all-stainless steel hardware is provided for adapting to your new or existing Hustler® BTV antenna. It allows for
easy removal of the coaxial cable feedline for yard maintenance, or antenna layover and disconnection for "stealth"
installations.
Technical Support
If you have questions about this product, or if you experience difficulties during the installation, contact DX Engineering at (330)
572-3200. You can also e-mail us at:
For best service, please take a few minutes to review this manual before you call.
Warranty
All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from date of shipment. DX
Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item or part thereof which is proved to be other than as warranted; no
allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or any other work, unless such charges are authorized in advance by
DX Engineering. If DX Engineering’s products are claimed to be defective in material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping
instructions for return to DX Engineering (transportation-charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by
Buyer unless made in writing. The above warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by
accident, rendered defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged
exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts thereof furnished by
Buyer or acquired from others at Buyer’s specifications. In addition, DX Engineering’s warranties do not extend to other equipment and parts manufactured by others
except to the extent of the original manufacturer’s warranty to DX Engineering. The obligations under the foregoing warranties are limited to the precise terms thereof.
These warranties provide exclusive remedies, expressly in lieu of all other remedies including claims for special or consequential damages. SELLER NEITHER MAKES
NOR ASSUMES ANY OTHER WARRANTY WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT
STRICTLY IN ACCORDANCE WITH THE FOREGOING.
©DX Engineering 2017
DX Engineering
®
, DXE
®
, DX Engineering, Inc.
®
, Hot Rodz
®
, Maxi-Core
®
, DX Engineering THUNDERBOLT
®
, DX Engineering Yagi Mechanical
®
, EZ-BUILD
®
,
TELREX
®
, Gorilla Grip
®
Stainless Steel Boom Clamps, Butternut
®
, SkyHawk™, SkyLark™, SecureMount™, OMNI-
TILT
™, RF-PRO-1B
®
, AFHD-4
®
are trademarks of
PDS Electronics, Inc. No license to use or reproduce any of these trademarks or other trademarks is given or implied. All other brands and product names are the
trademarks of their respective owners.
Specifications subject to change without notice.
