- 7 -
Radial Plate to Mounting Pipe
Place the optional
DXE-RADP-3
Radial Plate over the 3" OD (maximum) mounting pipe. Attach
the Radial Plate to the mounting pipe using one
DXE-SSVC-3P
stainless steel V-Clamp. Allow
approximately one inch clearance between the bottom of the Radial Plate and the ground to allow
access to the radial wire mounting hardware (see
Figure 1
). Connections to the antenna will be
made via the optional
DXE-112-KIT
chassis mount SO-239 connector. The
DXE-RADP-3
Radial
Plate comes with 20 sets of stainless steel hardware for mounting the radial wires. It is suggested
that 32 radial each 65 feet long be used, therefore additional
DXE-RADP-1HWK
Radial Plate
Wire Attachment Hardware Kits will be required.
Figure 1 - Optional DXE-RADP-3 Radial Plate Mounted to a 3" OD Mounting Pipe
